When you set the Shell Thickness too large, like 2 mm, Cura may generates hollow walls even if the Fill Density is 100%. To make sure the walls are solid, reduce the Shell Thickness to 0.4 mm and set the Fill Density to 100%.
Category Archives: Cura
3D Printer GCODE instructions
GCODE is a standard file type to control 3D printers. The 3D object is usually exported from the CAD program to an STL file, that fully describes the end product. 3D printers build the physical objects layer-by-layer, so we need to slice the object into thin layers. Turn off the fan after 5 minutes When …